Montag, 20. Juni 2016

OSPFv3 on MikroTik Routers









The network above should be configured and routed with OSPFv3. The network address is 2a03:f3a2:a2b2:xy00::H/64.

Set up a new config and set the link-local addess because it is needed for OSPFv3. Afterwards set the directly connected ip addresses.



https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiZoQEWOu6n8N6vQRbN-YpMMf-6yz94P5C4Wh-pQHXNl5on9U3e5AKNYXarDNIWIazgr6MpKbcd83IhwRj16q3cpQXfRUMeGSgmvsZ8rzHmyl25DNwAeDSyHAQvtFwL0sismJ7TPfg72ds/s1600/Unbenannt.PNG

OSPF Configration:

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgpSvpNwi2KvF_0zIpGDPQlmEQdxlAYDFp5YoSAfBgRsvdDKOCJ3m6gg7qMthaum2lV36wIxsYbo1-h2JsVWPyDIpMVc2bfUcFx4Q5XWe83fPL54KyEZzcGPqJp_5FKCNYeCJMN6Qr4brw/s1600/Unbenannt.PNG

Configure a bridge to configure the Router-ID, the addresses and the interfaces. You are able to see the routes now.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiUVABJxDKOyHNXzuIRlttvBOHJNiXXcfOG7D-pKoqdpPFSxQxhXSpDGklUiC4MEyh44vxX4TmbBJBt-ysC3P8fJL5fq4izF6yfnu7A2DFe2NKnrU6mlkXO7-QT2brY7jWkiIC-bhndD70/s1600/Unbenannt.PNG

System->Logging shows the transmitted data for OSPF.
You are able to see that IP-addresses are only transmitted if the network changes.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhfQq-epMEwik0iCBFYTNXQZEw4UAvnWDgCtWJ1E9Yv2rjD0Uw4vTIPrZmYk4eyCCIDV3KpVRWuINbw2NmjIpAlmtpi1GfkAjBylZ6sjRs_IX7yHElXs-_ar1xRZSUNskBN6j5lHl2P3OQ/s1600/Unbenannt.PNG

4 Kommentare:

  1. permission to use this as a material :)

    AntwortenLöschen

  2. Thank you for such a sweet tutorial - all this time later, I've found it and love the end result. I appreciate the time you spent sharing your skills.
    How to Use a Dremel to Cut Glass?

    AntwortenLöschen

  3. Thanks for sharing the information. It is very useful for my future. keep sharing
    How to Use a Dremel Tool?

    AntwortenLöschen


  4. Very enjoyable to visit this blog and find something exciting and amazing.
    How to Carve Wood with a Dremel Tool?

    AntwortenLöschen